Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
This item does not fit your vehicle
2008 Ford Explorer
These items fit your vehicle
2008 Ford Explorer
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This hitch lets you bring more on your adventures - tow a trailer, haul bikes, or carry gear. The 2" receiver fits accessories for work and play. Bolt-on install means no welding, and the powder coat finish resists rust for lasting use.
This hitch is ideal for towing mid-sized loads, including utility trailers or small boats. With a 3,500 lbs gross trailer weight capacity and 525 lbs tongue weight rating, it provides a secure towing solution for moderate applications. The 2" receiver size offers versatility for various towing setups.
Perfect for bike racks and cargo carriers, this hitch allows you to transport bikes, camping equipment, or extra luggage with ease. The 2" receiver accommodates a wide range of hitch-mounted accessories, enhancing your vehicle's cargo capacity for road trips and outdoor adventures.
Skip the stress - this hitch features an easy bolt-on installation with all necessary hardware included. No welding or complicated modifications are required, making it a straightforward project whether you're in your garage or driveway.
From road grime to unpredictable weather, this hitch is made to withstand the elements. The dual-layer finish - an industry-leading powder coat over a protective base - helps prevent rust, chipping, and wear, keeping your hitch looking great and performing reliably for years.
No bulky hitch sticking out - this model features a concealed main body that tucks neatly behind the bumper. The result? A clean, factory-style appearance without sacrificing strength or towing capability.
Keep your hitch in top shape with an open-back receiver design that allows for easy cleaning. Say goodbye to dirt and debris buildup inside the hitch tube, making it easier to maintain and use over time.
California residents: click here
Fit perfectly on our 2026 Mazda CX-50 Hybrid. Have only used the hitch with our bike rack, so can’t vouch for the towing capacity. Went on relatively easily, considering I installed it myself, without any assistance. Hitch arrived timely and in good condition. I only took away one star because the welds were a little rough, other than that it’s perfect.
This is my second trailer hitch that I purchased from etrailer and another satisfying purchase. The hitch arrived quickly and on time. The hitch did pop out of the shipping box but there was minimal damage. After watching the installation video, I was able to install this on my own using jack stands. The hitch fit perfectly on my 2025 Mazda CX-50 Hybrid. When I need a trailer hitch there is only one place to turn to, etrailer for the win!
Kate F.
2/2/2026
etrailer is lucky to now have you as a loyal neighbor (customer) Joe! I like to touch up my hitch with some Rust-Oleum spray paint, I usually go over the spots once a year, to avoid rusting. Not sure how bad the damage is, but that will help. What do you mainly use the hitch for?
The Curt installation of the C33MJ trailer hitch receiver onto a 2026 Mazda CX-50 went well. We installed the front bolts first and then rotated the hitch upwards to do the rear bolts using a jack to position the receiver. The etrailer installation video was very helpful to view the process.
As always, the whole purchasing experience from etrailer.com was easy and smooth. Staff responded to my questions were prompt and precise. The Curt hitch came as expected, and the installation was easy (the etrailer tutorial videos are were helpful). Anytime, I could, I would recommend etrailer.com to friends.
This is the third Curt hitch we've installed since 2015 and all have performed just as we've hoped. Unlike other reviewers who installed this on the Mazda CX-50, we had to unmount the bumper cover spacers to allow enough room for the hitch to seat properly and then had adjust the position of the spacers slightly and use a longer bolt to re-attach them. A bit more work than the installation video showed and likely due to a manufacturing difference in this 2026 CX-50 Turbo TPP model trim level and the models the other reviewers shared.
This product didn't fit my 2025 Mazda CX-50 as well as i expected. The cross bar between the two frame mounting brackets pushed the bumper cover mounts back 1/4 inch. It was difficult to install as a result. The final appearance is not greatly affected and the hitch is usable.
Good construction and quality. Fit perfectly into my cx50 hybrid. Installation was very easy.
The hitch fit perfectly. Box was a little beat up. Paint on the hitch a little chipped. The installation was on a CX50 hybrid. Just needed to remove the hitch cover in bumper and cut hard plastic bumper support. Installation took about 45-50 minutes.
On my install I used a dremel tool to cut out an opening for the original hitch cover and reinstalled it
to take up some space around the hitch.
Video is all you need to install yourself. Still need a light kit.
Overall, good fit on the 2025 CX-50, but it is very snug and does take some wrangling if you are solo.
First attempt I made the other day was with a jack and jack stands. The problem here was I concentrated on only one side and getting it lined up and the bolts in, and was unable to get the other side to even go up because it is a *very* snug fit on the frame.
My second attempt today I took a different approach as a solo install. I get it up in the cavity area, then put myself directly under it from the center and lifted it into place equally on both sides. It's still very snug, but this allowed me to get it installed on both sides. Lining up the holes was tricky, but I managed to work the front holes (toward the front of the car) in first, then i used a small floor jack on each side to push upward, and then use some of my own muscle to essentially pivot it off the existing bolts and line up the back holes (toward the back of the car) so I could thread the bolts in. Took some work, but still managed it in under an hour I think overall.
Mike L.
10/21/2025
If you got the hitch installed within an hour, you did very well! Good job!
The hitch fit our 2025 Mazda CX-50 perfectly. Installation was smooth and we were able to take the mountain bikes out the same day. Saved us nearly $500 compared to getting it done at the dealership.
It fit on my car perfectly. Not hard to install at all. It fit and the. Bike hitch installed on the car just as intended
It was a fit. What else is there to say. etrailer is always great.
Mike L.
3/5/2026
Thanks, William! I'm glad we could help!!
Nice hitch fit my 2024 Mazda CX-50 perfect. My only complaint is how it was packaged. There is no foam or cardboard on hitch to protect it during shipping. Three areas poked through the box and the powder coating was scratched off so I had to touch it up with black paint to prevent rust.
Pretty easy installation!!
Received and installed on my 2025 Mazda CX50 Hybrid. Fits perfectly.
Michael
4/6/2026
No issues.
High quality product at a good price. The box had some damage but the hitch was well secured and didn’t have any scratches. The instructions were straightforward but I found it easier to install the hitch by removing the entire lower bumper cover and cutting out the required section while it was off the car. Raising the hitch with a floor jack made it a one person job. This is my fourth hitch to buy from etrailer and I have always been pleased with the parts and installations.
Brooke M.
5/20/2025
Really appreciate you sharing what made the install easier for you! That's for other folks to know who are also hoping to tackle this install project. :) Whatcha towing with the new 2025 Mazda?
Brooke M.
5/22/2025
When we attempted to install trailer hitch on Mazda CX-50, the fit was not proper. The plates that mount to the frame are about 3/4" too narrow and will not fit around the frame. The vehicle is brand new with only 200 miles and should bolt right up.
Unfortunately we need to return this part and schedule a different install date for our customer. We have never had problems like this with Curt on prior installations, but can not recommend this product due to this fitment issue
Easy install, great quality, and videos were helpful!
This hitch fits perfectly and is tucked up nicely under the bumper of our 2023 Mazda CX-50. Great fit and finish. Only hiccup with the install was that I had to use a jack to get the last bolt to lineup perfectly.
2025 Mazada CX 50 S Premium Plus fit was good . Used a low profile floor jack to install it & a small bottle jack after I got 1 bolt on both sides installed to get the other 2 bolts installed .Installation video was straight forward and I would recommend this hitch
The product is great but the packaging needs work. On arrive the box was torn open and the backside of the receiver was sticking out. Because of this issue all of the paint was scraped off. I had to sand and repaint it before installing it. The product went in with no problem.
Cx-50 install. Did by myself by getting into place and using my leg to hold other side. Was able to get bolts in and get it up no problem. I am thin and didn't even need it the car lifted. A little tip too. The section that needs to be cut out at the back use a pvc cutter. Took 2 seconds and a flush cut. I am a pool contractor so I have them laying around. All good here. Was done in 25 minutes. Product arrived sticking out of the box via shipping but if it is made to haul 3500 lbs then I am not worried about that. Not sure if they can even ship these without poking out the box. lol. All in all everything was perfect. The online video was also dead on. If you have a cx-50 this is the one to get!!
Kate F.
5/14/2026
Thanks for the awesome detailed review J R! Sounds like the install on your CX-50 went really smoothly, and we appreciate you sharing the tips about using a PVC cutter for the trim section and handling the install solo. Finishing it in about 25 minutes is impressive too. The final install looks great, and thanks for sharing the picture! I appreciate your comment on the shipping, yes it does happen from time to time. What do you plan on using the hitch for?
Item shipped fast and arrived on time. Like the free shipping. Everything fit perfectly, so installation was pretty easy. I would recommend this and will purchase from e-trailer again.
The hitch fit perfectly on our 2023 Mazda CX50 following the directions provided. The painted finish is of high quality, definitely recommend this model for adding ability to tow a camping trailer.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Heather A.
4/10/2026
Christopher, that’s a great looking install on your CX-50 Hybrid. It’s always nice when everything lines up and fits the way it should, especially doing it solo. Sounds like it handled your bike rack setup perfectly so far, and getting it installed without needing an extra set of hands is a win. I hear you on the welds too, but glad overall it checked the boxes for you. What kind of bikes are you hauling with it?